Windows NT 4.0 display drivers Installation:

     If you have not download the device driver, you can download it form here.
     Unzip the bxvga.zip file to a flopply,  boot Bochs with Windows NT  

1. Click "Start" menu and select Control Panel from Settings group.
2. Select Display icon.
3. Select Settings of Display Properties.
4. Select Display Type.
5. Select Change from the Adapter Type area.
6. Select Have Diskof Change Display.
7. Place the floppy in drive A:.
8. When the "Install from Disk" dialog box appears,  click "OK".
9. When the "Change Display" dialog box appears, click "OK".
10.When the "Third-party Drivers" dialog box appears, click "Yes".

A message will appear stating that the drivers were successfully installed.
Click "OK".  You must now restart Windows NT 4.0.

# Selecting resolution and color depth:
1. Click "Start" menu and select Control Panel from Settings group.
2. Select Display icon.
3. Select Settings.
4. You can only Select Color Palette to 256 colors and frequency of 60Hertz
 for resolutions 640x480 and 800x600, but you can try others frequencies.
5. To select desktop resolution size, go to the Desktop area and use the
slide bar to change resolution from 640x480, 800x600 to1024x768.
6. Select Test to test the resolution. If the display test screen was good
then select "Yes" when the "Testing Mode" dialog box appears. If the
display test screen was bad then select "No".  Windows NT will give you an
error message.
7. Click "OK".  If the display test screen was good and you select "Yes",
Windows NT 4.0 will change the mode without restarting Windows NT 4.0.